Last Updated on April 16, 2022 by Bright Calister
What kind of paint to use on ceramic floor tiles? You can paint a ceramic tile with any color of your choice. However, it would help if you remembered that it is a high-traffic area. The paint may wear away or bubble with time.
It is the nature of the tiles since the paint will always be on top of the tile surface. This article shall discuss the type of paint you should use on the ceramic tiles. In addition, we shall look at how to paint the ceramic floors.
Type of paint to use on ceramic tiles
Epoxy paint, epoxy acrylic paints, enamel paints, latex paint, and acrylic latex paint are the type of paint that works on tiles. Before using these paints, you need to thoroughly clean the tiles. Afterward, apply a sufficient amount of quality adhesion primer, apply any of the paint mentioned above, and ensure you use two or three coats to have an even finish.
Here are the best paints for ceramic tiles:
Rust-Oleum Tub and Tile Refinishing Kit
Rust-Oleum Tub and Tile and Tile Refinishing Kit are some of the best paint for ceramic tile. The paint is durable and available in three colors – white, biscuit, and almond.
It is a two-coat paint that requires fixing before you can use it. Meaning that before use, you need to mix the two then apply them to the ceramic tiles. This step is critical for even finishing.
Also, you need adequate ventilation in the room, especially in the bathroom. It is best to open the windows while painting. Adequate ventilation is a great way to get good results.
One significant advantage of using the paint is that it makes the ceramic floors look fresh and smooth. It gives a clean finish to tiles that many won’t believe the floor was painted.
It is the kind of paint that dries quickly, so you will have a chance to move around the floors in a few hours after painting. Painting the tiles can be frustrating because you have to wait until it dries before walking on them.
If you paint the bathrooms, you know it won’t have much ventilation. Therefore, other paints can take days to dry. But, with Rust-Oleum paint, it dries faster than most paints. So, you will have less waiting time.
Rust-Oleum Paint is a two-part epoxy acrylic, and the advantage is a high tolerance for moisture and resistance to corrosion.
The paint will make your tiles look new, which is the essence of painting in the first place.
It is expensive.
How to use Rust-Oleum Tub and Tile Refinishing Kit
Using the paint is an easy process. The first step is to mix the parts the paint came with differently before mixing it with the main paint. For instance, mix the first and second parts separately for two minutes before mixing them.
Afterward, you should mix everything and use it before six hours to avoid issues. After applying the first coat, allow it dry for an hour or two before applying the second coat. At this point, it will rely on the quantity of ventilation coming into the room.
If the ventilation is sufficient, you can apply another coat in an hour. Alternatively, you can for two hours before applying the second coat if the ventilation is not enough. Also, if you want o to apply a third coat, you have to wait for an hour or two again.
After painting, it is best to wait for three days before using the space or exposing it to water. If it is a bathroom, it is best to avoid it for a week.
White Knight Tile and Laminate Paint
This paint is among the best paints for ceramic tile, laminate, and melamine surfaces such as shower recesses, cupboards, and splashbacks. But, you should note that the paint is not suitable for floors, including bathrooms or room floors. Also, if you want to use it in the kitchen, avoid the exposed parts to naked flames.
It comes in different colors, so you can select the color that suits your home best.
It is resistant to microbial growth. Therefore, the walls won’t have bacterial on them.
It provides a satin or gloss finish.
It is not suitable for tile floors.
It only suits vertical free-draining surfaces where water doesn’t gather.
It is unsuitable for use in situations where naked flames are present, such as kitchen walls.
How to apply white knight tile and laminate paint
First, you need to clean the surface. Then, ensure you thoroughly stir the paint before use. It is necessary to stir the paint in a circular lifting motion for a minimum of five minutes before use. During use, continue to stir it at consistent intervals.
It would be best to use a quality microfiber roller to apply the paint in a zig-zag manner to ensure even distribution. Although it dries in two hours, it is best to wait six hours before applying another coat.
Benjamin Moore’s Floor and Patio paints
These paints are among the most used paint for ceramic tiles. It is easy to apply and encompasses two options: Benjamin Moore’s floor and patio low sheen enamel paint and Benjamin Moore’s floor and patio high gloss enamel paint. It is best to select one for your ceramic tiles.
It is easy to use.
It makes the floor have a uniform finish.
The paint is resistant to soap, detergent, oil, and grease.
It is highly durable.
It is resistant to marring and scratching and provides a long-lasting finish.
It is biodegradable.
You can use Benjamin Moore’s paints in basements, patios, porches, showrooms, breezeways, and any light industrial application.
How to apply Benjamin Moore’s Floor and Patio Paints
Simply follow the exact procedure as you would with other paints. However, it takes longer for the paint to dry. In addition, you don’t have to worry about water exposure or naked fires. The paint is resistant to such hazards.
Xim Tile Doc Epoxy Acrylic Coating Aerosol
Here is another excellent choice for painting ceramic tiles. It is an epoxy acrylic paint comprising materials that ensure the paint stick when used on tiles. Also, it is resistant to soap hot and cold water. It promises to provide a long-lasting, attractive look.
A significant advantage of using Xim Tile Doc Epoxy Acrylic Coating Aerosol is the ability to resist cold and hot soapy water. Consequently, it will last longer when used on the bathroom floor or wall tiles, even with high exposure to water.
The paint comes in spray cans, so it is easier to apply. Hence, you don’t have to make special plans to apply the paint. The spray cans will do the job for you.
It is a durable paint due to its bond structure to ceramic surfaces.
It provides a new look to your tiles surfaces, saving you from buying new tiles. Hence, the paint saves you money.
It exists only in white color. Therefore, you have a limited choice of color. Some people don’t like to paint their ceramic tiles white.
It can’t work on galvanized metal surfaces. Therefore, it is not desirable on galvanized ducts for the bathroom exhaust fan or similar surfaces.
The application is simple; you have to spray the ceramic tiles’ surface.
Valspar Premium Enamel Spray Paint
If you don’t like using any of the paint mentioned earlier, you can buy Valspar Premium Enamel Spray Paint. It is perfect for ceramic tiles. It sprays out ultra-smooth finishing, offering your tiles the flawless coverage you desire.
Besides, you can use the paint on stone, terracotta, and more for flat, satin, or gloss finishes.
It is easy to apply. The vast finger pad that comes with the paint reduces the effort needed to paint by 33%, making it easier for you to apply the paint on your bathroom tiles.
You don’t have to wait for long before applying a second coat. Consequently, you can apply the second coat after one hour.
It dries rapidly.
Valspar Premium Enamel Spray Paint is water and scratch-resistant. With the paint, you don’t have to worry about cleaning the product scratching the paint while cleaning.
The paint is water-resistant. It is ideal to use in moisture-related areas such as the kitchen, laundry room, and bathrooms.
The paint exists in many different colors, including three metallics. You can select the color you like most and apply it to your tiles.
It is expensive.
How to use the paint
You can use the same method listed above.
Epoxy-coat Floor Coating kit
Are you still searching for the ideal paint for your ceramic tiles? The Epoxy-coat floor coating kit is among the best in the market. The paint originates from the United States.
It is durable paint.
It doesn’t smell like others.
It is slip-resistant, which makes it perfect to use for bathroom tile floors.
It is easy to apply.
It is resistant to chemicals and salts.
It can resist oil and hot tiles.
It comes in limited colors. Therefore, you can’t make your preferred choice.
Valspar Terracota Touch
Valspar Terracotta Touch is another excellent choice to paint ceramic tiles. It encompasses texturing properties. And these properties make it easy to spray the paint in multiple thin layers.
The paint is also suitable for glasses, wood, metal, and plastic. Therefore, it is better than the White Knight Tile paint because it can be used on any galvanized surface.
It has a fast dry rate. On average, the paint dried up in an hour. However, you must apply it in a place with excellent ventilation.
It can be used on galvanized metal.
It is difficult to use indoors because of spray paint mist. But, you can apply it with caution or engage the services of a professional if you can’t handle it well.
You have to spray in servers thin layers instead of one thick layer to be the perfect finish you want.
You can’t use it in poorly ventilated places.
How to Paint Ceramic Tiles
You can paint your ceramic floor without the services of a professional. However, you need to carry out diligent prep work and utilize the right products to accomplish the task. Diligent prep work will prevent the paint from wearing out prematurely.
We shall discuss the appropriate steps to take before painting a ceramic tile. However, we shall provide a list of material you need for the task:
- Paint roller and cover
- Painters’ brushes
- Paint tray
- Putty knife
- Clean bucket
- Latex gloves or similar material.
- Orbital sander
- Tile paint
- Bonding primer
- Paintable caulk
- Polyurethane clear coat
- Tile grout
- Masking tape
- TSP cleaner, or it is equivalent.
Clean the tiles
It is best to start by giving the tiles a thorough cleaning. You can use disodium phosphate cleaner (TSP). The cleaner is sold as a powder, dissolves in water, and is an excellent cleaning agent capable of removing first grease, soot, and oils on the surface of ceramic tiles.
Please ensure you have the proper skin protection before using TSP because it is a strong chemical that affects the skin. You should wear shoes, pants, long-sleeved shirts and goggles. In addition, you should ensure excellent ventilation.
Then, mix a half-cup of TSP with a gallon of water.
This concentration is very strong. The next step is to get a scrub brush and multiple rags. Wear gloves and shoes, wet the brush, and scrub the floor to disintegrate the stains.
Allow the cleaned floor to completely dry in the ventilated space.
Sand the tiles
Use an orbital palm sander with 80-grit sandpaper to enable you to remove extra finishes on the tile, especially if you have a glossy surface tile. Then, use a clean, damp cloth to collect and lift any remaining dust from the agitation. The step removes all of the dust that survived the first cleaning process.
Repair cracked walls
Here is another crucial step for both walls and files. Please check any wall cracks or tile cracks and use gravel poly filler to fill them.
Prime the tiles
Priming tiles is one of the most crucial but overlooked steps. It is best to use a high-adhesion primer to develop a perfect environment for the paint itself. High-adhesion primer will bond to the tile itself while creating a surface that you can paint.
Primer will help prevent peeling and flaking of the paint after a short time. In summary, it is better and worth the extra spending.
Use a roller to apply a primer to the surface and distribute it evenly to avoid buildup in many areas.
When the primer is applied unevenly, you will recognize it once it is painted. Allow the primer to dry thoroughly as directed by the manufacturer.
Use painter’s masking tape
Before you paint, ensure to cover the areas you don’t want the paint to touch, such as edges, with masking tape. It is the main step to take if you want to accomplish the task with a professional look. In addition, if your bathtub is closer to the wall, this step is essential.
Paint the tiles
Painting the tiles is considered the easiest part once have managed through the cleaning methods. Primers such as latex, acrylic latex, and enamel paints are excellent on ceramic tile if you have used a quality high-adhesion primer to ready the surface.
Apply two or three coats evenly, as necessary, until you accomplish full coverage.
If you intend to paint a stenciled design on the floor, it is best to start with a solid painted surface that coats and seals all existing tiles and grout.
When it dries, stencil a pattern on top of the layer.
For those who wish to use White Knight Tile & Laminate paint for their ceramic tiles, you must sand the tiles a second tone before applying an additional coat.
Afterward, follow these steps:
Allow the paint six hours to dry before applying the new coat.
Six hours later, give the tiles a high sanding with 600-grit sandpaper or any sandpaper.
Lastly, stir the paint again before you apply the second paint.
Conclusion – What kind of paint to use on ceramic floor tiles
You can use any of the points discussed in this article to paint ceramic tiles. However, you need to follow the precautionary steps provided in the article. Call a professional if you can’t do the painting by yourself or are unsure about the quality of work you can do.
It is better to have a clean job than a rough tile work. We wish you luck in your future endeavors.